Video: Office Hours: Network Security / NGFW 'Ask Me Anything' | Duration: 5404s | Summary: Office Hours: Network Security / NGFW 'Ask Me Anything' | Chapters: Network Security Introduction (9.36s), Roadmap and Releases (201.55s), Customer Success Architect (978.415s), Q&A Session Begins (1236.4s), Version Upgrade Path (1426.61s), Firewall License Expiration (1585.525s), Clustering in Azure (1738.92s), Malware Detection Scenarios (1858.0851s), Two-Factor Authentication Discussion (2074.93s), AI in Firewalls (2198.2551s), Advanced Configuration Queries (2277.44s), Final Q&A Session (2723.74s), VPN Client Authentication (2857.3599s), Finalizing Quick Implementation (2985.945s), Q&A and Clarifications (3089.45s), Concluding Q&A Session (3437.465s)
Transcript for "Office Hours: Network Security / NGFW 'Ask Me Anything'":
Alright. Let's get started. Hello, everyone, and welcome to today's Forcepoint office hours. Today's topic is network security ask me anything. So office hours is a program that we run where we'll bring together, subject matter experts on a particular topic for a particular Forcepoint product, and, we'll present information and then open up to a a q and a session. We've done these two different ways. One is where we we push out a lot of information, for a particular topic, and then we'll take some questions. The other, like today's session, is we'll be very light on slides, light on presentation, with the bulk of the time available, to respond to questions. Okay? So for today, we have Klaus Majeski, principal product manager for network security, hello, class. Daryl Abernan, principal technical support engineer in our tech support organization. Lorenzo Cantelmi is a customer success architect. He is on his way. And, my name is Mark Lambert. I'm a senior program manager, also in the customer success department. K. So the the the agenda for today, Klaus will spend a a few minutes talking to you, from the product perspective, talk about the road map and what's new in the in the seven dot three release. Then we're gonna turn it over to Lorenzo for a couple of minutes and hey, Lorenzo. Hello, Lorenzo. Hello. How are you? Alright. Lorenzo will talk to you about the customer success architect program. It's relatively new here at Forcepoint. And then we'll get right into the questions. Okay? So with that, I will turn it over. Oh, before I do that, sorry. My own script here. Before we get started, you can download a PDF of today's presentation. There's a docs tab, on your screen. Click on that. You'll get immediate access to the PDF. A lot of good reference material in today's slides, so I do recommend that you download that. This session is being recorded. You'll get an email, tomorrow with a link to watch playback. You can enter your questions in the q and a tab at any time. And near the end, I'll push out a brief survey. We we we do look at them. We read every response. We do want your feedback. You know, for instance, if you have suggestions for for another session, you'd like us to see us come back and present on, could be specific to network security, could be for any Forcepoint product. We'd be we we we'd love to get that feedback from you. Okay? And with that, I will now turn it over to Klaus. Take it away. Hello. Hello. Can you hear me? Yes. Okay. Hey. My name is Klaus Maysky. I'm a product manager for the next generation firewall product or Secure SD WAN as it used to be called. And I'm going through the quickly the road map, what's coming up, and little bit about appliances and and, stuff like that, and then we go to Lorenzo. So let's see here. Yeah. This works. Good. So, we are about one week away when we are going to, release the seven seven dot three dot zero, release of the firewall product. So you see here the road map and that first half of this year, that's actually seven dot three release, what we have there. And then the second half of this year's is something what we call seven dot four coming out probably October or something like that. And the content is still, little bit open, so, depends how much, r and d can do by that time. But if I go quickly through, that seven dot three release, we have something called SMC as a service. That's, that's something we are probably going to release during the q three or early q four time frame. Basically, it's, for the small customers who have about 10 or 20 firewalls. It's a service where Forcepoint will run the SMC so that, you as a or customer can use it as a, cloud service. It runs there in the cloud. You just use it through the web GUI, and it works fine. Then, next new thing in the seven dot three comes probably in the one of the maintenance release is a virtual context log separation. So if you are using master engines and virtual engines, there was a problem that, you couldn't have a separate log server for each virtual context. But in this new release, you can do that. It helps in couple of use cases, like, if you have some virtual context that is generating huge amounts of logs. So it's handy to have it its own log server. Or if you are MSSP and you have different customers under different virtual context, so each of them could have their own log server. Then, about the appliances, I will go through that a little bit later, but there's the n 61, the lowest, the the smallest product that we have. Basically, compared to n 60, this has to double the performance but the same price, so it's a good replacement for that. It's already available. And then n three five zero five, comes available after a week or two once I get the SKU in the system. It's it's about if you know our products, it's about a half of the performance of thirty five ten. Then, explicit proxy with the Windows authentication proxy authentication. So that's something, if you if you have customers who don't have, like, a default route to Internet and they need to use proxy to get out there. So now you can use also firewall as that proxy. It doesn't have all the web proxy functionalities. So these customers are probably different customers than what you have on a Forcepoint web gateway customers. But, anyway, that's, coming into seven dot three as well. Then we did lot of smaller changes under the hood because, this is the LTS version that's coming out. So we are doing all the major certification on it. Like, we just started to do the common criteria certification, DOD APL, in in the future for the, US market and, ANSI in France. That certification, we are going to do with this release. So, as part of that, we did update, dynamic routing daemon. We are using free range route router routing. So we got rid of the quarka. So FRR is the routing daemon currently. So, that is there. We did up upgrade the kernel to the latest version. We did update lot of the encryption algorithms. We did upgrade some of the key exchange methods, just to give you a little bit, protection against the quantum computing. And we also added radius authentication for the engine logging. So when you SSH to the firewall itself, you can actually use two factor authentication radius on that. There were a couple of customers who, they had certification demands that they have to have two factor authentication everywhere, so that was one place where it was missing. And then if you are using web portal, that's a kind of read only view to the policies, logs, and, reports. So we, we kind of, end of sales, the web portal that we have currently, but we made it made it available that, you just enable it in a GUI, and then you connect to certain port. And it basically runs scripts that, query SMC API and give you the exact same information that you had for the web portal, but now it's coming through the SMC API. So that's pretty much the content of the seven dot three release, and and currently, we are releasing it the next Wednesday. So that's the seven dot three dot zero version, and then we start to do maintenance releases for that. And then the second half of this year, some of these will be in the seven dot four version. The big idea there is to use SAML authentication everywhere. So, you know that we can use SAML for admin authentication. We cannot use it for the browser based authentication yet. We are adding it there. We are also doing a lot of VPN client, new stuff there. And big idea is to combine ECA and the VPN client in the future so that we could have one client that that would actually actually then, probably, we we start to charge for it. So the current VPN client is free. But once we, combine ECA and VPN client, I'll probably put the price on it. Then, one other new feature there is the SSH or direct secure terminal. Basically, when you take the SSH to the firewall engine, many customers were saying that, well, I have a connection from SMC to the engine anyway. Why can't I use that same connection when I connect to the engine login? So that that's one of the features we are going to bring there. We are going to do some VPN client advancements. I think we are currently bringing up the VPN client for Mac, and and it will have the DPLS support. It will I'm not sure it does come out in next week, at the same time with seven three zero or a couple of weeks later, but that's coming quite soon. And then for the second half of this year, we are doing more VPN client advancements, making it better and better. Then another, additional stuff that we are doing is HTTP three support. We have a quick support for some like URL categorization, but we haven't really finished that quick support. So kind of quick and h t d v three go hand in hand, and that we are trying to get those out in the 07/2004 release. Then, of course, every product should have some artificial intelligence. So AI, So we are looking looking to put, similar kind of functionality that we have in a customer hub. So you can use normal language and ask questions, and then the AI will go through the documentation, knowledge based articles, and try to answer back to you. So we are trying to put that same functionality inside the GUI, so SMC. Local management, we have cup, kind of some customer segments where they, for example, install the firewall in the submarine or tank or ship. And there is normally one one firewall, and they would like to have a local manager, so no SMC. Just ability to do some small changes to the firewall rules. So we are going to make the local management available for that kind of cases. It will not have all the SMC facts functionality, maybe 30% of the SMC functionality, but there should be those features and functions that you actually need on that kind of use case. Then public cloud advancements, we don't have high availability for Azure and and and AWS and Oracle. So we have written some scripts, that make it available. We also in a previous release, we made kind of sync connection sync that works on a IP level three a granular three level. So it doesn't need the multicast that we normally use in a clustering. So that helps to make the high availability on the public clouds. So we are bringing I think AWS is pretty much there. Azure, we are still working on an Oracle, cloud, we're also doing for there. And then, some of the appliances, something that replaces 120. So if I click on the next slide so this is our appliance portfolio. So if you look at the bottom part of that, you have the 60 series. So, the old n 60 is replaced with the n 61, like, double the performance, same number of interfaces, same price. N 60 l, we still keep there. And then 120 series, that's where we have all the Wi Fi's LTE combinations. And, we also have the five g model there if you need it. And then over the time, we are going to bring 130 series probably end of q three, early q '4 this year. So it will be a little bit faster than the 120, and it has also two SFP, ports where you can put, for example, one gigabit fiber if you need need that. And then, about the same time, early q four, there will be new 2,300 series. It will go between the 2,200 series and 3,400 series, somewhere there, two models. And, what's specific about that? 2,200 series had only one model, module place. This one has two, so you can, do a little bit more variations. And then, probably next week, we have the thirty five zero five appliance, so it's it's there, on the 3,500 series. We are still doing some of the performance testing, but I think the HTTP 64 kilobyte performance is about 80 gigabits, so half of the thirty five ten. And it it should be available sometime next week. And then those are the because the appliance news and then I have one more slide. No. Well, there's additional flight about thirty five zero five, so it's the big one that has eight module slots. We are still running some of the data sheet values that that's why I don't have the exact values here yet. And then one new thing that is coming out is the four port 25 gigabit module. Currently, we have only two port. So this should be available, next week as well, so we can start quoting it. And it helps us on on on the higher end size where customers are asking more 25, gigabit port density. I think that's pretty much everything from my side, so I'll transfer to Lorenzo. Thanks. Thanks, Klaus. Yes. Let's talk a bit, rapidly about, the customer success architect. This is a role that's been established last year within our Forcepoint. And, going to the slide. One second. The overall goal is to maximize, the return of investment on, for the customer. And thanks to our experience, we are a team of, experienced people, and we are able to share this kind of experience thanks to different initiative. We in at the end of last year, we led the the program about the Matusi assessment. Maybe some customers leverage this kind of program and got benefit about the the outcomes of the findings, thanks to strategic definition in terms of the adoption. There, we review also the deployment, the big lines. Also, there, we are company with the recommendation and knowledge based articles. Of course, we we do have a certification of for the products. And beyond that, we have also some endorser certification related to specific standard topics and requirement. Then we are focused on the post sales, let's say, life cycle of the the product. And, we used to cooperate with all the function internally, to to reduce the silos. Other initiatives that we define internally, for example, with Klaus, there is a a voice of product initiative where basically we centralize all the inputs coming from the customers, with enterprise support to to share it with DiEM for planning. And, there is also there's a now new initiative to be part of these office hours. And finally, there is the possibility to reach us reach to us via customer success managers to discuss specific technical, aspects of the products. We for example, each product has its own catalog of knowledge sharing. For example, for firewall, there might be the chance to have discussion about the upgrade plan for the SMC and the next generation firewall. We we can give I can give also consultancy in terms of production environment, procedural of testing. Overall, I I'm happy to share, let's say, my background with you and also my team, colleagues. K. And, yeah, also, we are, we work closely with the, r and d to also share the latest updates in terms of features and so on. And, we are not there to replace also. Let me clarify these other functions such as sales engineers or consulting system engineers, solution architects. But as I said before, we are more at the post sales side, and we are there to harmonize all the functions together. Okay. Fantastic. Thanks, Lorenzo. Appreciate that. Thanks a lot. Alright. Let's move on to the q and a. So we got a fair number of questions submitted early, when you registered for today's session. So really appreciate that. We want we're gonna go through those, and also pay attention to the, questions that are coming in live. I see Taro has been pretty active responding to questions. Thank you, Taro. Yep. So we'll get started. Let me make this bigger on my screen so I can read this. So the first question, are there any plans to introduce quality of life improvements such as being able to search for objects at a higher level instead of having to drill down to areas such as hosts, groups, etcetera? And granted the left hand bar for refreshing and constantly losing your place when clicking on different areas of the firewall policy. Yeah. There I can take that one. K. So so, there there are some UX changes, in the seven dot three dot zero, release. We we changed so that the left hand bar has, is is changed a little bit so that all those different areas where you go, you can click on the left bar and go directly there. So it shortens the path a little bit. There is the the general overall search. So if you, you know, at the top of the, GUI, the general search, so you can search anything in in that one, and that will then when you click on the search result, it actually takes you to the correct place. Preventing the left hand bar from refreshing. I think there is a about that. I think there is a back open for that because, always, it's not intended and desired behavior. Like, I see it in the lab, and it's kind of annoying. Yeah. I have I I don't I don't have it bookmarked, but I think we have a bug open to improve that behavior to get rid of it. Yeah. It sounds like a bug. And then, the the rest API why why we are talking about the API. In our road map for the longer future, there's something called infrastructure as a code. There are some cost larger customers of ours who would like to automate everything, either using, Terraform scripts or or, different kind of other, automation tool using SMC API. And in the future, in the engine, there will be an API. So some of them are using SMC directly through the API, so automating a lot of the functions. So we are going to improve that in the future as well. And as a basis is that when we create a new feature, it should always have a support k? Next. Alright. Thank you. Next. Can you describe when new features in the newest release such as seven dot two x are added to the current stable release such as seven dot one x? You have the wrong release dates. Yeah. I mean, class one to speak to that. Yeah. Let me take that one. So, we normally don't port backwards, new features. So when it comes when a new feature comes in a release, that's where it comes, and and then it it will be there in a later long term support it release. There are some exceptions. Sometimes when it's a small feature that that doesn't have dependencies, we might backboard it to the previous, release. So currently, we have long term supportive release called six ten, seven one, and 73. This new one will be LTS as well. And and gradually, we drop support for the six ten. It will be there still for a while because a lot of the big customers are in there. But I would recommend at some point, moving yourself to the 7.one. That's LTS version as well. And then seven dot three is the next LTS version. Don't go there yet in the production environment. So wait for something like seven dot three dot two or three, and then they go there. And I see there's another question that can we update six dot eight to seven dot two? Yes. You can. I would probably, update to seven dot one latest release because that's LTS, and it's a little bit more mature, that seven dot two. So my recommendation would be go to go to 7 dot one latest release. And if the only reason why to go to the seven dot two would be that if there's some feature that you really, really need, then you might go to the seven dot two. K. Next. Yeah. Just some additional so, like, six, like, with engine six eight to seven two, I think seven one as well, the direct upgrade is not supported. There are too many changes. So, like, which, I mentioned, I wrote the reply that, like, seven two three release no stealth that you can upgrade from six ten to seven two directly. So if you wanna go to, like, a let's say, seven one nine engine, you should first go to six ten play the six ten version and then to seven one nine. And release notes, always check the release notes before upgrading to make sure you're following the correct upgrade path. Alright. Thanks. Klaus, I think this next one you've already answered in your slides. When will Saddle OpenID support be available for VPN login? Yeah. So, that's debatable. It's 7.4 or 7.five. Depends on the resourcing a little bit. But, anyway, it's it's, in a bigger scheme, I would like to make everything where we have authentication so it should support SAML. Intra ID and and, all that kind of, interoperability should be there. I'm not sure if it comes in the seven dot four, but, definitely, by the time we are in the seven dot five, it it should the feature should be there. Okay. Next. Why do our firewalls expire now? Let me take that one. Yeah. So, I'm I'm not sure if you know this, but we have two types of firewalls, n series and s series. N series is the traditional firewall that we sell, like, we have been selling twenty years. S series was a little bit different. So it it it has, like, a expiration date, so it's like a subscription. You buy every year a subscription. And when we implemented that, it it pushed the expiry date for the s series. That's where it should be. But on the when we created it, it also created, that same end date for the end series. And and we are working with the in our internal IT to get that end date out of there. It shouldn't be there. And then, we have been manually, removing those, from your, end series licenses. Within a month or two, we have it automated so that it doesn't appear there anymore. So if you see, license end dates in n series appliances, please contact our support and let us know. It shouldn't be there. If you have s series, s like a s 60 is a SKU for that. If you have those, yes, there should be an end date, and they will expire. It will not stop the firewall traffic. So it has something called graceful, expiration. Basically, that you cannot push the policy, but the firewall actually processes traffic. So, it doesn't go offline. Okay. Next was a two part question. Here. Oh, do you wanna add something? Yeah. The behavior is that this carpet then also based off to go along. Okay. Alright. Perfect. K. Next, what are the chances of clustering in Azure? And number two, whether Forcepoint FlexEdge secure SD LAN seven one supports accelerated networking in Azure? Yeah. I can take this one. So, yeah, in seven two, we added the connection synchronization for external high availability feature for public clouds. So, basically, we use a unicast state sync instead of the multicast, to overcome that limitation of public clouds that that connection information can't be synchronized between two to three engines. And then you use an external load balance or, for example, road based VPN tunnels to pass use high availability or, like, a basic, like, active standby setup in those public clouds. So that's available already in the seven two. And then, there's an another option describing that mentioned KB article where you configure, like, couple of single engines in, as in Azure and use Azure's resource manager for high availability. And then and I think Klaus mentioned earlier that we're making improvements for public clouds also in the future versions. And then, for the set now for the, Azure Accelerate networking, I checked with the engineering that we do have support for Mellanox drivers, which was one of the two drivers that, Accelerate networking supports. And, it was test seven one and seven two. They quickly checked that those those work, but we have not done any testing with this this feature, so we cannot really, say that it's officially supported. But, in theory, it should work. Yeah. And, yeah, we had a discussion. There's, Mellanox drivers and then there is the, Azure own driver. So we don't support that part, yet. So we are taking a look, in which release we can start supporting that. But the Mellanox drivers, they we have been supporting those, so it should be okay. We are looking at supporting those the the other drivers. But for time being, you should be okay with this. Okay. Moving on. Thank you. Yeah. Questions about a couple of messages being thrown. File malware detected, not blocked. Network application recognition and SD WAN VPN switched to the standby line. Tara, I'm gonna guess you provided him. Yeah. Yeah. So that that was actually there was one recent case on that first one sort of file malware detected but not blocked. So, I there's at least couple of scenarios where this event, like, initially can happen. Oh, one is that with specific configuration, the engine works that way, so you have to go and change the change the specific setting. And then with the, if you're using advanced malware protection, if if a new new file that is not known before is is sent to the AMDP service for, for sandboxing or detonation. It it usually takes from thirty seconds to three, four minutes for the AMDP to analyze that file. And, depending on how you've configured because you can configure the firewall to either allow the file if if you don't if we don't receive response from AMDP in six seconds, or firewall holds few last bytes of that file waiting for that, those results. And since the analysis will take longer that that sick than that six seconds, So if you allow the file when you don't get response in that time, then it's basically allowed at that point. But if then if the analysis says that the file is, malicious, then any further down downloads or uploads of that file will be blocked based then based on the cast, results after that. But, initially, it will be allowed through because, due to the fact that it it takes some time for the for the sandboxing to really find out if if the file is good or bad. And then, network application recognition, I just added a link to the online help. So, it was kind of unclear, like, what is what is asked about here, but that basically talks about the how network application detection, recognition, or detection in our engine works. And then, yeah, for the standby link, this, basically, we use, several things like latency packet loss, cheater, etcetera, to detect the, quality of the links. And then if those go above specific thresholds, the standby link is activated and the active link is, made standby. And, of course, always if the link goes down and tunnel goes down, then the that, switch over happens. And there's couple of links. Couple of KPR links that I added, talk more about the multilink VPN link section. Alright. Next one. Changing my status to do not disturb. Yeah. Just wanna I guess, it's worth mentioning. I know a lot of folks joined, after I gave my opening remarks. There you'll see here clearly there's a lot of, useful information, these links. There's a there's a PDF available if you're not already aware. There's a docs tab on your screen. If you click on docs, you can download the PDF of these slides to get access direct access to all these links that we've we've provided for you. K. Next. I think there's already a question in the live chat around two FA. Two FA configuration. Competitors have easy two FA configurations. Any current easy to implement guide or solution upcoming? This is probably probably for you. Yeah. So, well, we've we've got that SAML support being added, so that could be one way. But, like, the multilink, multi sorry. Multifactor authentication, were were you doing it through radius and from the in the SMC side, there's really nothing special that has to be configured. You just create the radius authentication server authentication method and use that for the, for the VPN client connections. And then the radius protocol itself handles the multifactor authentication part. So, like, there's that, radius challenge and message that the firewall relays to the VPN client and user does whatever he he or she has to do. So, for example, at the one time password from the MFA app, and that is then firewall then relays that back to the radio server to finalize the authentication. Apart from that, I'm not aware that we're planning to do do improvements on the multifactor authentication part other than, at the SAML support. Yeah. That will come, in the next releases. We are going to add, more, on that side. K. Next. Alright. Klaus, you've already talked about AI in your, road map slide. Anything else to add beyond what's already on the screen here? Yeah. So, we did some hackathons about, where the AI could help in a in a firewall environment. So, we are, following up some of those, but the the low hanging fruit, if you will, was to use that AI for, searching for answers in our knowledge basis and documentation. We are actively looking for different ways to, use it. I know competitors are using it for, creating example policies and stuff like that. We all take we we will take a look at that as well. Currently, I don't have anything very specific, other than what I mentioned in the road map, yeah, road map. But we are, continuously looking for best ways what actually makes sense. There's a lot of hype there, but, we are trying to figure out what what actually helps the, our customers. Yeah. Well well put. Well said. Alright. Next, another multipart. Could we be able to monitor VPN traffic to another platform, real time graph traffic live? If yes, how to integrate it with PRTG? Any tool available for to replicate the configuration into another? And what if we want to upgrade SMC client machine to latest version? What are the steps needed? Yeah. So the first one, you reduced the API. Or, Lorenzo, if you wanna take this, go ahead. Yeah. Basically, yeah, TotalTax. Yeah. There there is a way to retrieve the status of the VPN via API. Also, there is there are there there is the option to monitor via SNMP. And, of course, there is the way to forward, the related logs to third parties for integrations. Concerning the the manipulation, also the the data, would be imported in our system. Within the the SMC, there is a way to restore the backup, which implies all the processing of the data within, the database. However, there is there are other customized operation manipulation, which are, anyway, not supported. Based on export of elements by XML or by JSON VIPI. There are some customers this kind of manipulation to to obtain their own goal, whichever are are unsupported, let's say. And, about the third point, the client upgrade is part of the overall active plan that we can discuss together. And, typically, once you upgrade the main primary management server, the SNC client is the the following component we connect to. So it's part of the pipeline. And and there is also the the, as I share also the the possibility, if you are a customer with enterprise entitlement, you can reach out to your to your customer success manager and consult, open a session with me with the check of the the update. Okay? Alright. Thank you. Next, need help in configuring BGP, installing new SMC for availability, SSL VPN configuration, and IPsec VPN route advertisement. Yeah. This was kind of open ended, like, this is more like a if you need help, like, we have online help. We have articles in the hub. If you need Forcepoint help, that would be considered professional services that you can contact sales for, availability and pricing. But then, of course, if you're configuring things and, can't get it to work or don't, have questions, you're gonna always reach out to our tech support, via phone or by open a case in the customer hub. Maybe a quick question, Tara. Do we have I I think we have also web based training. So, just to cover some of these areas. Oh, yeah. Of course. Yep. That's true. Yeah. Quick question. Comment, my side, on this. Yeah. About the about BGP, may require extra experience and knowledge, to to master. Recommendation is always to accompany the development in production with the, preproduction environment where things are tested, the scenarios are incrementally built. And, in such a way, the troubleshooting later on, it's easier also in the production. And about, the installation also, the we can cover it in a dedicated session if needed. Yeah. Actually, we have, like, a video for that that I've I've created a couple of years ago. It's basically just running the SMC installer and just selecting the it to be additional SMC server. So it's it's fairly simple process. And for anyone that doesn't know, you can access all the training. Go to your your Forcepoint customer hub account. And on the top, there's a tab that says training. That'll link you over to the Forcepoint Sniper Institute, and there you'll find all of the training materials. Yeah. At in the yeah. At the end, we have some helpful links. There's a link to the, Forcepoint support videos, NGFW section where you can find that SMC Perfect. H a installation video. Perfect. Thanks. Alright. Let's let's move on here. Connection firewall communicate with SMC over reverse proxy. What's the best way to recover a cluster if members have mismatched configuration? Yeah. I was thinking about this. I didn't check with engineering, but I don't see how it could work because, first of all, we use TLS, communication or the secure the communication with TLS with the internal SMC internal CA by default. Okay. You can use the external things like seven zero six eleven version, but only for a new installation. But then the actual communication is completely proprietary, so it's not HTTP or anything. So I don't see how reverse proxy could work in this situation. And then, actually, I I didn't notice the second part. Well, the configuration mismatch shouldn't really be possible. Only way you could have that that well, it's basically a bug if if you install policy and somehow one note takes the policy, another one does the rollback. Then, one way to recover from that would be to, manually apply the previous policy to the one that, where the new policy got installed. Other way I can think of would be that you would disable a node in the cluster and put policy to the only to the one node, and that's definitely something that you should never do if the other node one the other node disabled node is still running because that will cause problems. Both nodes will think that they are the only node in the cluster, due to the mismatch configuration and state sync not working. But, yeah, the best way to recover if this happens would be to install policy again. So install policy to all cluster members. And if you if the issue was caused because you had one note disabled and other one was still running, then, back to, like, initial setter note that was disabled to initial state and then install policy. That way, don't, cause problems before the policy is installed. Alright. This is the last three of the early submitted question. Let's get through these as quick as we can and, shift over to the live questions that have come in. Is it possible to open for traffic to, star.domain.com? Possible to create reports showing all domains of one object have communicated with in the last x days? Yeah. So, URL list element can be used to allow, like, wildcard matches. I added that. K. We are all linked there. Of course, the limitation with the URL list elements is it those are matched only to the HTTP and HTTPS traffic. With the domain name elements, that won't work because those are resolved with DNS queries. So, if it unless there actually is a, like, a star.domain.com in DNS that won't resolve to anything, and then the rule won't match. And then, yeah, the reports, the I meant to look in look into these reports, but, yeah, there are, like, rip reports based on the URL categories, URL access, so I think that should be possible. I have not verified it, though. Alright. Next is, asking about the possibility to use information from ECA during the user authentication process at the VPN client level. Yeah. About this, I just took over in the previous slide with, from Klaus to the road pump. There is the VPN announcement. So this kind of integration can be is under consideration by product management and would be rather, I guess, ECA inside logic inside the VPN client. But still, again, something that PM should assess. And, we recommend to if it is not the case yet, to open a future request, about your requirements. Such a way, we are, sure that, we'll be covered in the next, ten days. Yeah. And and then one other similar kind of question that was asked about VPN client is that do we provide certificate authentication? So use case is that you could differentiate between company machines and not company machines. And company machines could have access to the more resources than not company machines. So we are we are thinking bringing that kind of functionality into the VPN client and our combination of ECA and VPN client and also using the user information, or as much information as we can get out of the client in in the firewall decisions. And I see Timo is active in the q and a. Thanks for jumping in there, Timo. Appreciate it. Okay. Last one for the early submission questions. What is Forcepoint's current recommendation regarding quick traffic management? So Yes. Or? Yeah. Go ahead. Okay. Thanks. So, basically, the the support, is, since the version seven dot zero zero. And, also, it is required in a specific update package since 1727. Then beyond that, then recommendation is always to keep, this version that the package, the latest installed. There is the adoption for the specific network application that, you should consider. Quick web dot quick, SMD and also quick other. There is a knowledge based article attached. And, it is recommended if HTTP, as traffic is expected, so deleted, to block QUIC as currently, can the traffic cannot be the therypted. So if if it's on the other side, HTTP is not used, then, the quick should should be allowed because can, allow should allow the traffic to for other protocols. Yeah. And, like Beyond that Yeah. Sorry. On a like I showed on the road map for the second half of this year, we will finalize. There are some parts of the click that we haven't implemented, So we will do the rest of the work, during seven four and seven five, releases. Thanks. Okay. Thank you. Last slide in the deck. A lot of links, a lot of very useful reference material. Again, this is available as a PDF under docs if you wanna go ahead and download this. So that concludes the slideware that we had for you guys today. Let's review what questions have already been addressed in the live q and a. So there was Klaus, you mentioned that, we're adding, like, SSH access, secure terminal access to the SMC. So there's a question if this is supported on the FIPS mode. I don't that's a difficult one. I'll have to check with the r and d because it it risk yeah. It it restricts some of the actions. Let me get back to you on a written answer. I cannot answer it right now. And then there was another one that Klaus, you probably can answer. So will SMC as a service be available for local deployment? I would assume no. No. So, currently, at least in the near future, no. So, we we will run the SMC as a service for now, and, we we try it out first with the smaller customers. And, if if it works well and and then we start to increase it, we'll think about with the, partners that are their MSSP partners that could actually handle some part of it. But as as during this year, definitely no. Next year, might be something that we should consider, but it's too a little bit too early still to say. Right. And then the next one, also, do we have plans for iOS VPN client? I have not heard of plans, but Yeah. Sounds the only the only thing I saw that they were at they were asking about tablets and and others as well. Yeah. So, we have a VPN client support for the Apple m one and m two architectures. Yeah. That's MacOS. Yeah. That's MacOS. IOS, I'm not sure, but let's put it that way. If you need that kind of support, please describe what is the use case and create the feature request because we are working on a VPN client, on the second half of this year and probably continue early next year. So if you have a specific feature request about that, let us know. We have a long list of requests what what is needed there, but, if you have a good use case, we can prioritize that. Anything else? Yeah. Did that one about the current SMC version seven dot two, SMTP server configuration only supports IP addresses and not FQDNs. Has this limitation been addressed in version seven dot three? Does it now support FQDNs for SMTP configuration? I don't remember. There there was a discussion about the SMTP server, earlier this year. I'll I'll get back to you if if there wasn't anyone who could answer that. We'll, take a look and give you the written answer on that one. Good. Fair enough. SMC. Question on If I understand correctly, at the moment, can only handle the eventuality of a disaster recovery. Do you plan to cover the operational continuity of the SMC in the event of temporary unavailability? Yeah. Right now, at least, the failover is manual. I don't know if there's plans to add automatic or dynamic failover. No. Well, the the original idea, you know, that the firewalls, they will run even without the SMC. So and without the log servers. So we originally, we thought that there's not too much hurry if the one SMC goes down so you have enough time to manually switch it. So currently, that's how it works. If you need automatic switching, between the different HSA, SMCs, please raise a a it's a request. Currently, we haven't seen too much customer request about that, but if you have customer who wants that, let let us know. For that SMTP question, I see we have an improvement open for engineering, but I don't think that's targeted for specific version yet. So, hopefully, in some some of the future versions, we'll have that support. Alright. Let's move on. About AET, is it possible to have visibility when firewall block or detect these kinds of attacks? It depends depends a little bit, about the AETs. So I used to give a a lot of presentations about AETs and and and the Evator tool that we had. The problem is that, it goes through the different levels of the TCP IP stack. So if if you have, it's it's difficult to keep track on that where you see the AET because it might require three, four, five things before it's actually on AET. So we try to make it available every time we know about it. And I specifically asked, long time ago from the RNT, is there a way if kind of reliably say that this was AET? And they said that no because you have to keep so much stuff in a memory, and it starts to fill up the memory quite quickly if you have a lot of connections. So some of them, yes, we can, detect them and give the lock entry. For other ones, currently, no. Okay. Thank you. I did just push out the survey. If anyone if everyone would care to give us your feedback, we sure do appreciate that. Okay. Let's the question that have not been answered. Any plans to make the VPN client support auto reconnect? Yes. There there has been couple of, kind of always on VPN client has been asked and and also to reconnect that it would automatically reconnect. There's a feature request about that, and we have a kind of list of the VPN client related feature requests, and then, we prioritize them with some some logic, and then then we start to implement those. And I think it was quite high that it's a request. Mhmm. Any plans to allow configuring ports as a switch port group in another appliance like n one twenty. Aero, do you know that? No. I'm I'm not sure. I I think it requires that specific type of, like, module or specific types of ports in the appliance itself. So but, I'm I'm not sure if there are any plans to add this kind of functionality to. Currently, at least, I'm not sure. So I think we the only appliance where we have, ports that could be used as a switch port is the 100 twenties. Right? Yeah. I don't remember off the top of my head. Yeah. That no. I know for sure. So it it it can be used as a switch configuration as well. But it's very basic switch configuration. It doesn't have, like, a Cisco switch, all the functions and features. It it's meant for the small offices where you can use it as a switch. Alright. We're almost at time. I wanna try and get as many as we can here. Are there any plans to improve the response time of the SMC to get to the data faster? Some reports take days or hours when you are sending the query. Yes. So we we started with r and d, a plan to make the, log server and and the SMC. No. Mostly, it's a log server, when you run the reports. So it doesn't support, multithreading as well as it should. So there's a plan, to look for it and make it like a the log server itself, supports multithreading in the receiving some of the logs. But when you run reports or do some queries, it doesn't support multithreading that well. So we are improving each, one piece at a time, and then make it faster and faster. But it will take a little bit time before we are there. But it's known problem, and we are working on it. Yeah. Yeah. Terrific. Alright. Next, another I think we've kind of addressed this. Another question about iOS tablets. This question from Ian. Thanks, Ian, for your question. Also, we can auto reconnect on the VPN client would be would help somewhat. Yeah. I think we've already addressed iOS questions and VPN I'm sorry. Auto reconnect. Are there any plans about supporting WireGuard or SSL VPN for site to site VPN? No. Basically, no. So currently, we, because the the SSL VPN doesn't have a good standard, so it's it's IPsec is a standard. There, we can support many vendors if they adhere to standard. ELS part or SSL VPN part, not so much. Currently, it's not less. Yeah. And I wasn't even familiar with Wirecard. Just Googled it real quick. And, yeah, it looks like it's like a lighter version lighter and better performing than IPsec VPN and based on UDPs, but I don't think we've just been in the plans for that. Yeah. So we we are working on the background. So when you do the SSL VPN, we we start to support the EDLS. So using UDP under SSL, that's faster when you are transferring big files. Okay. Question from Luca. To send notifications via email, I can configure an SMTP server in the SMC dashboard. This configuration does not allow me to set credentials for authenticated access to the mail server. Do you plan to support authentication to allow the SMC to connect to mail servers that require TLS authentication? Yeah. That's part of that improvement that I that I mentioned. So to add a support for FQDN and also TLS. Correct. Okay. Great. Thank you. Will there be a switch to enable or disable a VPN connection? Is this a VPN client question or probably. No. Well, you can actually in in a current VPN client, you can dis kind of disable it, but I'm I'm not sure if that's a use case what they are looking for. I'll move on. But, Anita, thank you very much. We're actually chatting before the call about, when we should come back depending on on how this call went and the type of questions we've got. We will plan to come back. We do a lot of sessions around other products like DLP, new DSPM. We have a CATASP session coming up in two weeks. It's been a while since we've run a network security session. I'm gonna speak on behalf of my panel here. Yes. We will come back, and do this again. Hopefully, it won't be a year, since we did it for the last one. Are there any changes coming to your QA processes to avoid the recent spate of better performance issues in the seven dot one engine release? Fair question. Klaus, quick response on that? Yeah. So we have increased, q and a in a way that when the developer creates a new feature, they actually, put it in a they merge it to the, main, branch, and then we run nightly, tests around that. So the developers will get feedback immediately next day what went wrong if if there was any bugs in the code that they wrote. So then they remember immediately. Okay. I did that yesterday. Now I can fix it. Previously, we waited, like, to the end of the major release, and then then we did a lot of testing after that. So, I think this way is better because now we get the box immediately when they are created and and fix them early in the in in this space. And that should, improve the quality what we have in in the product in these new releases. Yep. Agree. Alright. Comment from Ian about Proxmox, the free download. Available. Alex, thank you. Thank you. Alex, thanks for joining. Glad you've you've gotten value out of this session. Really appreciate your feedback. Thank you. Timo. Yeah. Thanks. Hey, Timo. Attack. Yeah. Thanks, Timo. And then one ten, one 15 supports it, but only one twenty is the current model. Thank you. We're considering refactor the log server to be based on Elasticsearch since the integration can already be done and logs can be retrieved from Elasticsearch in the storage tab? Yeah. We we thought about that, but we would like to keep the log server code in our own hands. I I don't want to trust the third party. Yes. We do support, integration with Elasticsearch and OpenSearch, so both are supported. So if you want to use them, be, be happy and do do it that way. And and maybe you can do it in the meantime while we are fixing the lock server performance issues. So Okay. We're coming to the end. A couple more. Any any last minute questions, feel free to pop them in. V OLAF, VPN client and Yeah. I think those are mostly just comments to that question about, disabling and enabling VPN. Yep. Yep. Got it. Thanks, Darren. Yeah. And I actually brought a reply, like, you would for the site to site VPNs, you basically have to disable access rules that use the VPN and install policy. Or then you could delete the SAs, but, tunnel will be established again if there's any interesting traffic, I e, traffic that should use the VPN. Yeah. Alright. Great. We're a little past time. I see we're starting to lose some folks. Thanks to those of you who hung on the whole time. Boy, this has been a very lively, session, the lively group. Thank you so much, for the questions. Thanks for folks like Timo also helping us out, to keep up with the with with all the q and a and some great great, additional feedback. We will come back. I can't tell you the time right now, but we will come back with another network security session just based on on how well this one went. Thank you all so much. Please take the survey. Next session's coming up. For those who have additional Forcepoint products. We're gonna do a DLP ask me anything session next week. I believe it's next Thursday. The week after that, we're gonna be doing a session focused on CASB, overview of CASB and also an AMA, asking anything type of a format. We've been running a series on our new DSPM product line. We did part three yesterday. Part four is gonna come out, in July. Anyway, I'll leave it there. We're overtime. Thank you so much. Hope you found value. Appreciate you all coming out. Appreciate all the, questions and the interaction. And I am going to leave the stage, and we'll see you at on the next four start office hours. Thank you very much. Thanks everybody. Bye. Thanks to my panel. You too. Get it. Bye.